Curved surface processing |
|
- The spinning surface where the angle of the wall changes every moment. The jagged back with the R of 0.04 (The cutter: ball-tapered 19° tip with the R of 0.04)
|
|
- Direct engraving of the logo on the curved surface.
|
|
- Aluminum cap of liquor (photo of the product). Both concave, reverse characters and convex, positive characters are directly engraved on the cylindrical surface.
|
Sample
Trial production
Electrode
Product
|
- In the time when there were no 3D scanners, we used the resin samples to manually create the CAD data.
|
Sample
Mold
|
- Direct mold engraving from 3D digitizing (outsourcing) with a 3D scanner.
|
4-axis rotary processing |
|
- Knurled electrode by simultaneous biaxial processing of X axis and A axis (rotation axis). (the cutter: 45° tapered tip with the diameter of 0.68) * There are videos.
|
|
- square 1 convex 0.3 knurled electrode.(The cutter: 45° ball-tapered tip with the R of 0.04)
|
|
- square 0.8 convex 0.5 knurled electrode. The surface was processed by tilting B axis because of the large conical surface with a slope. (the cutter: 38° tapered tip with the diameter of 0.06).
|
|
- The processing of the twisted surface on the circumference by simultaneous 2-axis machining of X axis and A axis (rotational axis).
|
|
- Direct engraving of the internal thread.
|
|
- Marking for the year printing machine. Direct engraving with the cylindrical interpolation. (Material: Brass).
|
|
- Direct engraving of the focus ring mold with the cylindrical interpolation. * There is a video.
|
|
- Direct engraving on the bearing mold cover.
|