Cutting |
|
- Direct engraving of convex letters on the mold instead of using the EDM.
|
|
EDM |
|
- The mold of a battery cell with the diameter of Φ7. The material is carbide, the characters are 0.55 mm height.
- The material of the electrode is tungsten-copper. The tool used is 20° tapper, and the tip tool's diameter is Φ0.06.
|
Hard-to-cut materials |
|
- Engraving on tungsten, difficult-to-cut material. Engraved with a small diameter cutter on a tungsten round bar of Φ4.
|
|
- High hardness material from solid to straight carving.
- Material: SKD11HRC60
processing range: 92×30×14.5(mm) Tools used: 1, Roughing R3 ball 2, Medium rough R2 ball 3, Finishing R1.5 ball 4, Finishing R1 ball
|